Koolance CPU-300-V13 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Koolance CPU-300-V13. Koolance CPU-300-V13 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
CPU-300 Installation Guide v 1.01
Apply thermal interface compound directly to the
CPU die. Do not add more than is necessary to cover
it with a very thin layer.
Remove the protective film from the bottom of
the CPU cooler.
(For Koolance Systems) Insert the temperature
sensor into either bottom groove on the CPU
cooler. The sensor is required for proper fan
speed control and system safety features.
Apply metal tape to keep the temperature probe in
place. Do not stick metal tape to the the raised
(polished) portion of the CPU cold plate.
You can use a zip-tie to further secure the
temperature probe to the CPU tubing.
CAUTION: Be sure to attach the Koolance temperature probe to
the CPU cooler during installation. The safety features of your
system may not function properly without the correct placement of
this probe.
!
Assemble the CPU mounting bracket using the appropriate clips. The
longer pair are for Intel P-4 processors; the shorter are for AMD Athlon/
XP and Intel P-III processors. (AMD 64/Opteron and Intel Xeon require
additional adapters. Please see www.koolance.com.)
Clips for P-4 socket 478
Clips for AMD socket 472
& P-III socket 370
Fit the cooler and mounting brackets onto the CPU socket. The bracket clips
slide inward and outward in order to hook to the socket tabs. Check that the
bracket clips are aligned before installing the tension screw.
The tension screw must be aligned over the center of the CPU (particularly
for AMD Athlon/XP processors). Otherwise, insufficient contact could result in
poor performance, or even damage. There are 3 metal center receptacles on
the CPU-300 cooler:
Vista de página 0
1 2

Resumo do Conteúdo

Página 1

CPU-300 Installation Guide v 1.01Apply thermal interface compound directly to theCPU die. Do not add more than is necessary to coverit with a very th

Página 2

For AMD Athlon/XP processors, the left or right receptacles will be used,depending on which direction the CPU socket faces in relation to the cooler.F

Modelos relacionados CPU-300-V10 | CPU-300-H06 |

Comentários a estes Manuais

Sem comentários